What Research About Experts Can Teach You

How To Jump Start A Car The knowledge of jump starting a car should be known by everyone since in any car the battery can be dead anytime. The process of jump starting a car is very easy, but if you do not know how to do it, you are advised to look for a professional who will help you because it can sometimes be risky. The main thing to have is jumper cables before you are set for jump starting your car. The following procedures are to help you in jump starting your car safely. You should be able to check the location of your battery, or you can check the manual of the car if you are not sure where it is. Place your car next to the car providing the jump. If the car providing the jump is in a wrong position you might suffer the problem of the jumper cable not reaching your car battery so you should ensure that it is positioned well. The cars should be in a position where the jumpers cable should be able to reach their both batteries. Switch off the car providing the jump and note that the hoods of the both cars should remain opened. On end of the jumper cables must be clamped onto the battery of the car providing the jump. The jumper cables have color coding which is black and red of which red is to indicate the positive and black is to show the negative. The red clamp should be connected to the red terminal of the battery and then the black clamp to the negative terminal of the battery. Ensure that the clamps do not touch each other which can cause a very risky electrical spark and you have to make sure that the clamps are connected correctly according to the colors in both cars.
Getting To The Point – Automobiles
Though the spark produced around the battery can be reduced by connecting the black clamp to the engine. The engine providing the jump should be turned on and left to run for about ten minutes to charge the dead battery after following the above procedures. Check whether your car can now start by turning on the engine of your car.
Getting To The Point – Automobiles
There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. The last one, you should give your car to a mechanic after jump starting it to ensure that there is no additional problem engage in your car.